Nostalgic Warehouse Craftsman Knob with Classic Rosette - Skeleton Key Mortise Lock

Nostalgic Warehouse reproduction skeleton key mortise locks are a great antique door knob replacement. The mortise box replaces most vintage skeleton key boxes found in older homes. Customize your craftsman knob with multiple finishes above.

	Note: If your door is not prepped for a skeleton key type mortise lock box, these door knobs will not fit. These antique reproduction knob sets are meant to replace old worn out skeleton key lock boxes or you can prep new doors for the mortise box for that vintage feel. Don't settle for cheap immitations. Replace your rusty old locks with our high quality, English-made version. You'll be thrilled with the quality of these exquisite reproductions. All of our mortise locks are keyed alike. Body: W- 3" H - 4" Thickness - 9/16". Face 7/8" x 6"/ 2 1/4"backset. 2 1/4" C/C knob spindle to keyhole. 8mm spindle hole is on the square.
Craftsman Knob Specifications - Top quality, forged brass knobs & plates - Vintage designs - Mortise-lock boxes for antique doors - Full Lifetime Warranty - Limited Lifetime Mechanical Warranty - Lifetime Finish Warranty - Fits doors from 1 3/8" - 1 3/4" thick. - Dimensions: Knob: 2.25" Diameter -Rosette: 2.5"

These skeleton key locks are not recommended for use on exterior doors. For keyed entry doors we recommend using a passage function knob in conjunction with a Nostalgic Warehouse Deadbolt above. Crystal or porcelain knobsets are not recommended for exterior use and are not covered under warranty if used for that purpose.

Nostalgic Warehouse Craftsman Doorknob Functions

Nostalgic Warehouse door knobs are available in different functions. Please review the descriptions below so you can order the correct door knob function for your application.

	Nostalgic Warehouse Passage or Hall and Closet Door Knobs are used on doors that do not need a locking mechanism. Halls, closets, pantry or laundry doors will typically fit this function. Remember, Passage door knobs do not have a locking mechanism.
	Nostalgic Warehouse Privacy or Bed and Bath Door Knobs are typically used on Bedrooms, Baths or Office doors where a lock for privacy while occupied is desired, but a keyed lock is not really necessary. Nostalgic Warehouse privacy door knobs have a push button on the rosette or backplate as shown to the left to activate the lock. On the outside, there is a pin hole for emergency unlocking. Some door knobs will have a pin hole inside a circular piece, while others just have a small pinhole.
	Nostalgic Warehouse Double Dummy Door Knobs are sold in pairs. Dummy door knobs do not have a latch or mechanism of any kind. These door knobs are surface mounted to a door that has not been bored (large hole cut out) for a door knob. Dummy door knobs are generally used on double doors that use a ball catch at the top to keep them closed so a latch is not required. They are also usually found on the inactive side of a french door - a single dummy mounted on either side of the inactive door.

Whats Included with Your Nostalgic Warehouse Craftsman Door Knob

Passage Door Knob Contents
A door knob and chosen rosette for both sides of the door, latch mechanism, strike plates and mounting screws.

Privacy Door Knob Contents
A doorknob and chosen rosette for both sides of the door, latch mechanism, generic unlocking tool, strike plates and mounting screws.

Double Dummy Door Knobs
Two non functioning doorknobs and chosen rosettes with mounting screws for surface mounting.

Note: Nostalgic Warehouse door hardware is shipped standard with square corner strike and faceplates. Rounded corner strike and faceplates are available upon request. Drive in latches also available upon request.

Nostalgic Warehouse door hardware is assembled custom to fill your order. As a result there is a 25% restock fee assessed on all orders because the items have to be disassembled upon return. Nostalgic Warehouse Returns must be made within 30 days of the original purchase. Please contact us before return.

Nostalgic Warehouse warrants its products to be free from defects in materials and workmanship. This warranty is extended to the original user of Nostalgic Warehouse products as long as the User occupies the residential premises on which the Products were originally installed. For more information see the complete Nostalgic Warehouse Warranty.

Nostalgic Warehouse door hardware is assembled custom to fill your order. As a result there is a 25% restock fee assessed on all orders because the items have to be disassembled upon return. Nostalgic Warehouse Returns must be made within 30 days of the original purchase. Please contact us before return.