Emtek Select Customizable Lever with Disk Rosette

Build your own custom lever style.

Using the menu's on the right, you can easily customize your door hardware. Keep in mind, these levers are custom assembled to the options that you choose. Because there are so many options we don't have an image for ever possible configuration. PLEASE DOUBLE CHECK YOUR SELECTIONS. These levers are customizable when you order them but will come assembled and cannot be taken apart in the field. Custom assembled hardware is subject to restocking fees if returned. See our returns page for more details.

1. Choose a Rosette Finish Rosettes are available in multiple finishes. You can choose from the menu on the right to select your rosette finish. Popular combinations include having the rosette and handle the same finish with the stem a different finish. Or you can also select a different finish for each part of the lever.

2. Choose a Stem Style and Finish Stems are available in multiple styles. Choose a stem style from the menu on the right, then choose from multiple finishes for the stem.

3. Choose a Handle Style and Finish Many handle styles are available and most are available in multiple finishes allowing you to customize the look and feel of your lever handle.

Handing. When ordering lever handles or handlesets, we'll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. Learn How to determine lever handing here.

Emtek Select Lever Specifications

- Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
- Shipped with Mortised tubular latch (drive-in latches are available upon request).
- Fits Standard Door Preparation.
- Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
- Backset must be specified upon order placement. Choose between standard 2 3/8" or 2 3/4" backsets.
- Installation instructions included in packaging.

What is CF Mechanism?You can upgrade the Emtek Elan Lever Handles with Rope Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch.

Emtek Select Lever Handle Functions

Emtek Lever Handles are available in several functions. Please review the descriptions below so you can order the correct door lever for your application.

	Emtek Passage or Hall and Closet Lever Handles are used on doors that do not require a locking mechanism. Halls, closets, pantry or laundry doors will generally use a passage leverset. Passage levers do not have a locking mechanism.
	Emtek Privacy or Bed and Bath Door Levers are most often used on Bedrooms, Baths or Office doors where a lock for privacy while occupied is desired, but a keyed lock is not really necessary. Emtek privacy levers have a push button on the rosette or backplate as shown to the left to activate the lock. On the outside, there is a pin hole for emergency unlocking. Some levers will have a pin hole inside a circular piece, some just have a small pinhole.
	Emtek Double Dummy Door Levers are sold in pairs. Dummy levers do not have a latch or mechanism of any kind. These levers are surface mounted to a door that has not been bored (large hole cut out) for a lever. Dummy leverss are generally used on double doors that us a ball catch at the top to keep them closed so a latch is not required. They are also commonly found on the inactive side of a french door - a single dummy mounted on either side of the inactive door.
Emtek Keyed Levers	Not all Emtek knob and levers are available in a keyed function. For your exterior doors you may consider and Emtek passage knob or lever used with an Emtek deadbolt above, or and Emtek Sideplate Lock which incorporates the lever and deadbolt with one larger decorative backplate.

Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.