|
How to Order Emtek Basel Lever with 1.5" x 5" Stretto Rosette Emtek's Basel lever with the 1.5" x 5" Stretto rosette are just what you need for your doors with smaller than standard bore holes. These uniquely beautiful leversets are designed to fit on a modified 1 1/4" bore hole. Be sure to take a look at the diagram below for the exact door prep needed for this hardware. The privacy knobs come with a separate thumbturn for locking your bathroom or bedroom doors. Rosette Options. If you're looking for the Emtek Basel lever coupled with a rosette that will fit the standard 2 1/8" bore hole then take a look here: Show me the Basel lever with other rosette options Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come. Satin brass is a custom finish option and can take longer before being ready to ship out. Split Finishes. You can order the Emtek Basel lever with split finish. Please call us to place your custom order. 307-886-9449 Mon-Fri 9-5 Mountain Time. Emtek Basel handle with 1.5" x 5" Rosette Specifications - Complete set. Includes levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware. (Privacy locksets include a separate thumbturn for locking) |
|
Dont forget your... Emtek Deadbolts | Emtek Handlesets | Emtek Keyless Locks Emtek Multi-point Trim | Emtek Door Hinges | Emtek Bath Hardware |
Order Help
Emtek Basel Lever Handle Functions
Emtek Lever Handles are available in several functions. Please review the descriptions below so you can order the correct door lever for your application.
 | Emtek Passage or Hall and Closet Lever Handlesare used on doors that do not require a locking mechanism. Halls, closets, pantry or laundry doors will generally use a passage lever set. Passage levers do not have a locking mechanism. |
 | Emtek Privacy or Bed and Bath Door Levers are most often used on Bedrooms, Baths or Office doors where a lock for privacy while occupied is desired, but a keyed lock is not really necessary. Emtek privacy levers have a push button on the rosette or backplate as shown to the left to activate the lock. On the outside, there is a pin hole for emergency unlocking. Some levers will have a pin hole inside a circular piece, some just have a small pinhole. |
 | Emtek Double Dummy Door Levers are sold in pairs. Dummy levers do not have a latch or mechanism of any kind. These levers are surface mounted to a door that has not been bored (large hole cut out) for a lever. Dummy levers are generally used on double doors that us a ball catch at the top to keep them closed so a latch is not required. They are also commonly found on the inactive side of a french door - a single dummy mounted on either side of the inactive door. |
| Emtek Keyed Levers | Not all Emtek knob and levers are available in a keyed function. For your exterior doors you may consider and Emtek passage knob or lever used with an Emtek deadbolt above, or and Emtek Sideplate Lock which incorporates the lever and deadbolt with one larger decorative backplate. |
In the Box
Whats Included in Your Emtek Basel Door Lever
Passage Door Lever Contents
A Lever for both sides of the door, latch mechanism, strike plates and mounting screws.
Privacy Door Lever Contents
A Lever for both sides of the door, latch mechanism, generic unlocking tool, strike plates and mounting screws.
Double Dummy Lever Handles
Two non functioning levers and mounting screws for surface mounting.
Note: Emtek door hardware is shipped standard with square corner strike and faceplates. Rounded corner strike and faceplates are available upon request. Drive in latches also available upon request.
Return Information
Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.